Forum | Application | Technology | Products | Calibration | Currency | Conversion |
  Shopping Cart |  Logout   
 
Dear enduser,
Welcome back!
 
 
logout
 
Why Join SMC?
About SMC
Buyers
Engineers
Distributors
Suppliers
 
ALIA GROUP
 
Search Products:


 
Contact:
Site Manager
SmartMeasurement: The Ultimate Source of Instruments
    SmartMeasurement >> Positive Displacement Flowmeters >> ALGPD
   
Products // Positive Displacement Flowmeters
11
ALGPD
The SMC ALGPD series gear flow meter is suitable for the precise flow measurement of various fluids with viscosities ranging from 5~25,000 cSt. Providing sufficient lubricity of the fluid, the small gear flow meters type ALGPD 01/1 and 02 as well as ball bearing versions may be used for fluids below 5 cSt. The ALGPD is CE and ATEX approved and is ideal for use with polyurethane & polymers, isocyanates, sealing materials, petrochemical products, fats, heavy oils, glues, paint, wax, and abrasive fluids.
FEATURES

High output frequencies resulting in good resolution and suitable for pulsating flows.

Reverse-flow detection and pulse multiplication functions.

Ex-protection EExiaIICT6/T4.

Resistance to high voltage from 50 kV up to 120 kV.

Special meters with high-pressure connectors up to 10,000 psig (690 bar).

Heated versions are available on request.

The K-factor (no. of pulses per unit volume) is almost constant over a wide range.

 

SPECIFICATION

Gear Flowmeters ALGPD -  series

ALVTM Electronics

Connections : Female for,Ermeto-fittings GE 6-PSM,GE

LCD display : 8 digits (14 segments), digit height    

 

14-PSM or GE 25-PSM, bores for SAE flanges 1¼”

7mm for real-time value, totals and programmable

Operating pressure: small sizes up to 10,000 psi (690 bar),

Linearization : with 10 points

  larger to 55,000 psig (4000 bar ).   Ambient temperature : -40 ~ +70

Process temperature : 355 °F (180 ℃)

Process temperature : -40~+250 °F (-40~+120 ) with a

Flow rates :  0.001 ~ 265 GPM (0.005~ 1000 LPM)

distance at least 1" (25 mm) between

Viscosities : 5 ~ 25,000 cSt. .

meter and electronic housing

Material : Housing : SS 303 or 316 Ti

Weight : 1.5 lbs (700 g)

Gears : SS 303 or 329 Shafts, bearing bushes,

signal output : push/pull, Imax : 20mA, frequency

tungsten carbide, ball bearings

Frequency output/divider : 3-wire, 8~30 VDC controlled, 

Weight : 0.8 ~ 8.8 lbs (400~ 4000 g)

 

Ex-versions : 12-30 VDC < 25 mA,

Seals : O-rings: viton, teflon, NBR or EPDM (for brake fluid)

output: fmax: 3,000Hz, duty cycle: approx.1:1,2.divider,

Linearity : ±0.5% of value @ 1:20 for viscosity 15~50 cSt.   pulse width: 1 ms, 20 ms, 50 ms, fmax : 500 Hz

 

±0.25% of value for viscosities 50 to 25,000 cSt.

Analog output : 2-wire (4~20mA)

ALVTE Carrier Frequency Pulse Amplifier

Load :  < 800 Ω

Supply Voltage UB : +8.5~ 29 VDC, controlled.

Time constant : < 0.2~3 s (programmable)

 

(incl. reverse-battery protection)

Supply voltage : 14-30VDC controlled, UB = (Rload x

Quiescent current : < 5 mA     20mA) + 14V

Frequency range : 2 ~ 4,000 Hz

Resolution : 12 bit (3,9uA)

Process temperature : 250 °F (120 ℃) with a distance of

Housing : IP 65, aluminum AlMgSiPb, blue anodised

 

at least 1" (25 mm) between meter and electronics;

Ex-protection : II 2 G EEx ia IIC T4, BVS 03 ATEX E 205

 

300 °F (150 ℃) w/ at least 2½” (65 mm).

 



   
 

English | Spanish | German | Italian | French | Chinese Traditional | Chinese Simplified | Japanese | Korean
 
Copyright © 2001-2002 SmartMeasurement, Inc. Suggestion   About Us   Privacy   Disclaimer   Contact