Forum | Application | Technology | Products | Calibration | Currency | Conversion |
  Shopping Cart |  Logout   
 
Dear enduser,
Welcome back!
 
 
logout
 
Why Join SMC?
About SMC
Buyers
Engineers
Distributors
Suppliers
 
ALIA GROUP
 
Search Products:


 
Contact:
Site Manager
SmartMeasurement: The Ultimate Source of Instruments
    SmartMeasurement >> Positive Displacement Flowmeters >> ALHPD
   
Products // Positive Displacement Flowmeters
11
ALHPD

Two highly accurate cycloid-shaped screw spindles mesh and rotate inside a cylindrical housing with two overlapping holes in the form of a figure 8, which forms the measuring chamber. Liquid flows in axial direction and rotates the spindles; it is forced along the measuring chamber bores by the profile of the spindles. This happens without pulsation and with minimum leakage. The ALHPD are PD meters that are used for higher viscosities of 30~1,000,000 mm²/s and reverse flow applications.
FEATURES

High accuracy and Wide measuring ranges 1:100, 1:400.

Suitable for pressures up to 400 bar.

Low pressure drop compared with other positive displacement meters

Double pulse rate and reverse-flow detection possible.

Pulsation-free measurement, non-sensitive to pulsating flows.

Resistant to corrosion by advanced materials and bearings.

Low operating noise.

Ex-protection EExiaIICT6 for zone 1.

 

SPECIFICATION

ALHPD-  Helical Flow Meters

 

ALVTM Electronics

Process Connection : ¼"~ 1½" FNPT

LCD display : 8 digits (14 segments), digit height 7mm

Operating pressure : PN 16/40 up to PN 400

for real-time value, totals and programmable

Process temperature : up to +150℃ (higher T up on request)

Linearization : with 10 points

Flow rates : 0.01 to 400 LPM

Process temperature : -40 ~ +120 ℃

Viscosities : 30 up to 1 x 106 mm²/s ( below 30 mm²/s with

between flow meter and electronic housing

restricted measuring range and vertical mounting)

Ambient temperature : -40~ +70 ℃

Material : SS DIN 1.4571/1.4435 (SS316 Ti/316L)

Weight : 700 g

Linearity : ±0.50% of actual flow value (from 30 mm²/s up)

Frequency output/divider : 3-wire, 8~ 30VDC controlled,

±0.25% of actual flow value (from 100 mm²/s up)

Ex-versions: <25 mA, 12~ 30 VDC

Repeatability : ±0.10%

Signal output : push/pull, Imax: 20 mA, Frequency output,

Weight :   Flowmeters : 2.5 ~ 35 kg

fmax: 3k Hz, duty cycle: approx. 1:1,

 

Electronics : 0.25 ~ 2.5 kg

2.divider,pulse.width: 1, 20, 50(ms), fmax: 500 Hz

ALVTE Carrier Frequency Pulse Amplifier

Analog output : 2-wire (4~ 20mA)

Supply Voltage UB : +8.5~ 29 VDC, controlled (incl.

Supply voltage : 14~ 30VDC controlled, UB=(Rload)

  reverse-battery protection)     x20mA + 14V

Quiescent current : < 5 mA

Load : < 800 ohms

Frequency range : 2~ 4,000 Hz

Time constant : < 0.2~ 3 s (programmable)

Process temperature : 120 with a distance of at least

Resolution : 12 bit (3,9uA)

  25 mm between meter and electronic housing 150℃   Housing : IP 65, aluminum AlMgSiPb, blue anodized

at least 65mm

Ex-protection : II 2 G EEx ia IIC T4, BVS 03 ATEX E 205



   
 

English | Spanish | German | Italian | French | Chinese Traditional | Chinese Simplified | Japanese | Korean
 
Copyright © 2001-2002 SmartMeasurement, Inc. Suggestion   About Us   Privacy   Disclaimer   Contact