Process Connection : Threaded, flanged, ball valve |
|
Housing protection : NEMA 4,Class 1, Div 1, |
NIST traceable calibration : Standard |
|
|
Groups B, C, & D |
Process temperature : 32 ~ 160 °F (0 ~ 70 ℃) |
|
Ex-protection : II 2 GD EEx d IIC T2 or T3 or T4 |
Operating Pressure: 580 psig (40 bar) |
|
|
Mass Velocity : Up to 600 normal meters per second |
|
Cable (remote version) : 980’ (300 meters) |
Flow units : Kg/hr, Kg/mn, Kg/s Lb\hr, Lb/m Lb/s |
|
Wetted materials : 316 SSS (Hastelloy optional) |
|
NCMH, SCFM, NLPM, SLPM |
|
weight : |
Integral Ex proof : 11 lbs (5.0 kg) |
|
Mt/s, F/mn, BTU/Hr, BTU/min |
|
|
Remote Ex proof : 17.6 lbs (8.0 kg) |
Gas pressure effect : Minor < ±20% of calibration |
|
|
Remote Non Ex proof: 8.8 lbs (4.0 kg) |
|
pressure |
|
Data storage : EPROM storage up to 10 years |
Data logger : Flow rate, Total, Relays, etc. 5800 data |
|
Linear signal output : 0-5 VDC & 4-20 m A |
Gas temperature effect : 0.01% / ℃ |
|
Pulse output : scalable |
Accuracy (and linearity) : ± 0.2% of Full Scale |
|
Relays : Two 1-amp, Form C SPDT |
|
± 1% of Reading +(0.5% FS+0 .02%/ ℃ ) |
|
|
User-selectable alarm functions |
RAM Back-up : Lithium Battery |
|
Signal Interface : RS232 & RS485, HART, |
Repeatability : ±0.25% of Full Scale |
|
|
MODBUS, etc.. |
Turn down ratio : › 100:1 |
|
Power requirements : 115VAC @, ⅛A 230VAC @ 1/16 A |
Response time : ‹ 1 second |
|
|
24 VDC @ ¼ A |
Material : 316SS as per DIN 1.4571 (AISI 316 Ti) |
|
Power Consumption : 5 Watts or less |
Display units :Flow, Total flow, Switch settings |
|
Self diagnostics functions : ADC, DAC, |
|
Temperature, Elapsed time |
|
|
Alarm relay for EMI impulse noise |
Direct mass flow measurement of any gas with actual gas calibration.
