Download PDF of this page  Print this page

Insertion Magnetic Flowmeter
[ALMAGIS]

SmartMeasurement’s ALMAG-IS is an insertion electromagnetic flow meter designed to measure the fluid velocity of conductive liquids in applications where hot-tap or insertion installations are preferred.

This insertion mag meter is available in four standard lengths and may be installed in any pipeline with internal diameters ranging from 2" to 120" (50~3000 mm) and in permanent locations where cost or space limitations preclude the use of inline meters.

The ALMAG-IS insertion magnetic flow meter is designed for use with conductive fluids including water, raw sewage, wastewater, clarified water, RAS, and WAS. Available process connections include hot-tapped, DIN and NPT threads.

Request a quote on an ALMAG-IS insertion electromagnetic flow meter, or contact SmartMeasurement to learn more.

Sizes 2"~120" (50-3000mm)
Measuring Range 0.5 - 10 m/s - bi-directional
Protection IP 65 or IP 68 (Submersible, with remote style)
Connection Weld, ball valve(threaded and flanged)
Materials of Construction Transmitter Housing: Aluminum Probe: SS #304 (std), 316L, Ti Electrode: 316L, HC-22, HB3, Ti
Pressure up to 230 psig (1.6Mpa) max.
Outputs 4-20mA, Pulse
Media Conductivity > 20 μS/cm
Cable entry 2 X PG11
Communication RS232/485/HART, Modbus
Ambient temperature -13 to 140°F (-25 to 60°C)
Power requirements 19-36 VDC, 12-15W, 85-265 VAC, 45-63 Hz, ≤20W
Grounding Resistance Must be ≤ 10 Ω
Accuracy ±1.5% of reading (velocity v≥1m/s)
Temperature up to 248°F (120°C) max.
Display Flow rate, flow velocity, percentage, Total flow
  • Applicable sizes: 2"~120" (50~3000 mm)
  • Operating pressure: = 230 psig (1.6MPa) max.
  • Velocity range of 3-33 fps (1~10m/s)
  • Accuracy: ±1.5%
  • Hot-tap ball valve option allows sensor to be installed and retracted from process piping without shutting down the process
  • Conductivity of measured medium: ≥ 20 μs/cm
  • Electrode materials: 316L, Hastelloy, Ti, Ni, Tantalum
  • Max. distance between sensor and converter: 165 feet (50 m)
  • NIST traceable calibration certificate


©2017 SmartMeasurement™
10437 Innovation Drive, Suite 315, Wauwatosa, WI 53226
Tel: 1-414-299-3896 | Fax 1-414-433-1606 1-866-404-5415

Site Credits: Ecreativeworks